1remodel480320-1

How To Use A Woodworking Shaper

4 SAFETY RULES As with all machines, there is a certain amount of hazard involved with the use of this shaper. Use the machine with the respect and caution demanded where safety precautions are concerned.

The JET JWS-22CS woodworking shaper you have purchased is a high quality machine tool that will give To set up the shaper for collet use, remove the arbor and clean the spindle taper (Fig. 5). 3. Raise the spindle fully by turning handwheel clockwise.

This manual has been prepared for the owner and operators of a Powermatic Model 29 Shaper. Its purpose, aside from machine operation, MISUSE: Do not use this shaper for other than its intended use. If used for other purposes,

Woodworking can be dangerous if safe and proper operating procedures are not followed. As with all machinery, there dates 1/2” bore shaper cutters is available for use with your Router/Shaper and can be installed as follows: 1. DISCONNECT MACHINE FROM POWER SOURCE. 2.

DO NOT use prescription Do not expose the shaper to rain or use in damp locations. Clean and sharp tools give safer and better performance. As part of the growing line of Craftex woodworking equipment, we are proud to offer the

Wood Shaper (Model 43-355) PART NO. 432-09-651-0004 (01/11/02) Woodworking can be dangerous if safe and proper operating procedures are not followed. As with all machinery, there are certain hazards involved with the operation of the product.

This guide is issued as an addition to the machine’s User Instruction Manual. The standard configuration for machines with a vertical spindle shaper is with a single, fixed spindle.

98 jettools.com SHAPERS SHAPERS jettools.com 99 SHAPERS SHAPERS 1HP WOODWORKING SHAPER Powerful 1HP motor with industrial controls delivers consistent performance

Accidents, the following operational safety rules must be observed by everyone the CLUBusing A three foot perimeter around the shaper should be kept clear of people, debris and sawdust that might impair traction or footing to avoid slips and falls.

I. INTRODUCTION We are proud to offer the Model G1024 Shaper. The Model G1024 is part of a growing Grizzly fam-ily of fine woodworking machinery.

FOR THIS INDUSTRIAL WOODWORKING SHAPER KING CANADA TOOLS OFFERS A 2-YEAR LIMITED WARRANTY FOR INDUSTRIAL USE. PROOF OF PURCHASE Please keep your dated proof of purchase for warranty and servicing purposes. REPLACEMENT PARTS

7 Introduction The JET JWS-22CS woodworking shaper you have purchased is a high quality machine tool that will give you years of superior service.

**NOTE: These cutters do not utilize a rub collar to control the depth of cut. Please use these with a fence or optional rub collar #9126 for cathedral doors.

5 MODEL CX303 – 1-HP WOOD SHAPER As part of the growing line of Craftex woodworking equipment, we are proud to offer the CX303 a 1-HP Wood Shaper.

Tip #24 Shaping The difference between a plain edge and shaped one is often enough to elevate the beauty and elegance of the simplest project. The shaper not only makes it

Woodworking products with a Five Year Warranty that are used for commercial or industrial purposes default to a Two Year Warranty. Do not use this shaper for other than its intended use. If used for other purposes, Powermatic

DO NOT use prescription Do not expose the shaper to rain or use in damp locations. Clean and sharp tools give safer and better performance. As part of the growing line of Craftex woodworking equipment, we are proud to offer the

Prevent unauthorized use. 911790 – 06-09-03 SAFETY RULES FOR WOOD SHAPERS POST THESE SAFETY RULES FOR REFERENCE. FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS INJURY. Title: WOOD SHAPERS SAFETY FIRST.qxd Created Date:

Recommended Reads....


Please Share Us:
Votes 56

Rating: 5 out of 5

Updated: November 18, 2014 — 9:55 am

Site Disclaimer: This site is designed for educational purposes only, if you click on a link and make a purchase I will make a small commission. Furthermore, all videos and photos on this site are provided by 3rd parties. We take no responsibility for the content on any website which we link to, please use your own discretion while surfing the links.

Frontier Theme

Enjoy this blog? Please spread the word :)