1remodel480320-1

What Does A Woodworking Jointer Do

5 20. Keep visitors a safe distance from the work area. Keep children away. 21. Make your workshop child proof with padlocks, master switches or by removing starter keys.

This Woodworking Jointer is designed and intended for use by properly trained and experienced personnel only. If you are not familiar with the proper and safe operation of a woodworking jointer, do not use until proper training and knowledge have been obtained.

6-inch Woodworking Jointer Models JJ-6CSX, JJ-6CSDX, JJ-6HHDX WMH TOOL GROUP, Inc. 2420 Vantage Drive Elgin, Illinois 60124 Part No. M-708457DX This Woodworking Jointer is designed and intended for use by properly trained and experienced

Five Year Warranties do not cover woodworking (WW) products used for commercial, industrial or educational you are not familiar with the proper and safe operation of a jointer, do not use until proper training and knowledge have been obtained. 5.

7 SETUP Before setting up your machine you must read and understand the instructions given in this manual. The unpainted surfaces of the jointer are

6-inch Woodworking Jointer Models 54A and 54HH 54A (1791279DXK) serial # 8040543557 and up The Five Year Warranty does not cover products used for commercial, industrial or educational purposes. Products with a Five

From Workbench Magazine page 4 © 2002 August Home Publishing All rights reserved It’s important that a plate joiner doesn’t “slip” as you

Operating Instructions and Parts Manual 6-inch Woodworking Jointer Models 54A and This woodworking Jointer is designed and intended for use by properly trained If you are not familiar with the proper and safe operation of a jointer, do not use until proper training and knowledge have

Which of the following woodworking / remodeling shows do you watch? ___ Backyard America ___ The American Woodworker unplugging the jointer. 11. DO NOT pull the jointer by the power cord. NEVER allow the power cord to come in contact with sharp

The deeper the cut or the harder the wood, the slower you should run the jointer. If the jointer runs too slow, you may get a rough cut, so you'll want to experiment with

Maintain you balance when operating the jointer; do not overreach or use excessive force to perform any operation. Establish a comfortable position prior to When performing a woodworking operation on the jointer, you should attempt to complete it in _____ a. one pass over the jointer

Material left after the distorted areas are removed. It's a good rule to joint only good lumber. JOINTING END GRAIN End grain jointing is always difficult because you're jointing

woodworking jointer or planer, do not use until proper training and knowledge have been obtained. 5. Do not use this for other than its intended use. If used for other purposes, WMH Tool Group disclaims

52 FINE WOODWORKING TOOL TEST Combination Machines Five-function machines are heavy duty and JOINTER A 12- or 16-in. jointer will mill a flat face on most the Hammer does not offer reverse rotation on its

Toward proficient woodworking. Like SHOPSMITH, the Jointer is designed to accomplish quickly and accurately many operations requiring tedious hours of labor if done JOINTER this setting does not have to be measured; it may be taken directly fromthe indicator scale.

GENERAL SAFETY RULES WARNING:Do not attempt to operate until you have read thouroughly and have understood all instructions, rules ect. contained in this manual.

7 SETUP Before setting up your machine you must read and understand the instructions given in this manual. The unpainted surfaces of the jointer are

Recommended Reads....


Please Share Us:
Votes 76

Rating: 3 out of 5

Updated: January 5, 2015 — 5:52 pm

Site Disclaimer: This site is designed for educational purposes only, if you click on a link and make a purchase I will make a small commission. Furthermore, all videos and photos on this site are provided by 3rd parties. We take no responsibility for the content on any website which we link to, please use your own discretion while surfing the links.

Frontier Theme

Enjoy this blog? Please spread the word :)